ISOTHANEâ 6000
Series
Polyether based TPU Resins
High Elasticity Grade
Characteristics:
ISOTHANE 6000 series
products are polyether based thermoplastic polyurethanes with excellent
elasticity.
They exhibit high
moisture vapor transmission rate, excellent hydrolytic resistance, fungus
resistance,
and low temperature
performance properties. These
products can be injection molded, blow molded,
extruded, and
melt-spun.
Suggested Applications:
Sheets, Film, Tube,
and Melt-spun Fibers.
Properties:
Items |
Units |
ASTM |
6070A |
Specific Gravity |
gr./cm3 |
D-792 |
1.07 |
Hardness |
Shore A D |
D-2240 |
70A |
Tensile Strength |
Mpa psi |
D-412 |
25 3600 |
Tensile Modulus |
|
D-412 |
|
@ 50% elongation |
Mpa Psi |
2.2 320 |
|
@ 100% elongation |
Mpa Psi |
3.1 450 |
|
@ 300% elongation |
Mpa Psi |
5.4 780 |
|
Elongation @ break |
% |
D-412 |
740 |
Compression Set 22 hrs @ 23℃ 22 hrs @ 70℃ |
% % |
D-395 (B) |
25 70 |
Tear Strength |
N/mm lb/in |
D-624 DIE C |
390 70 |
Abrasion Resistance |
mg (loss) |
D-1044 (Taber) H-22 |
5 |
The above values are shown as
typical values and should not be used as specifications.