ISOTHANEâ
5000 Series
Polyether based TPU Resins Biomedical Grade
Characteristics:
ISOTHANE 5000 series
products are polyether based thermoplastic polyurethanes. They
exhibit excellent
bio-compatibility, hydrolytic resistance, fungus resistance, and low
temperature
performance
properties. These products can be
injection molded, blow molded, and extruded.
These are used for
biomedical and drug administration applications.
Suggested Applications:
Wound Dressing,
Trans-dermal Patches, IV Bags, Catheter Parts, Medical Tubing, and Surgical
Gowns.
Properties:
Items |
Units |
ASTM |
5075A |
5080A |
5085A |
5090A |
Specific Gravity |
gr./cm3 |
D-792 |
1.10 |
1.12 |
1.13 |
1.15 |
Hardness |
Shore A D |
D-2240 |
75A |
82A |
85A |
90A |
Tensile Strength |
Mpa psi |
D-412 |
31 4500 |
37 5300 |
39 5600 |
41 6000 |
Tensile Modulus |
|
D-412 |
|
|
|
|
@ 50% elongation |
Mpa Psi |
2.3 340 |
3.6 520 |
3.9 560 |
6.2 900 |
|
@ 100% elongation |
Mpa Psi |
3.2 460 |
5.4 780 |
5.9 850 |
8.3 1200 |
|
@ 300% elongation |
Mpa Psi |
5.9 850 |
10 1500 |
12 1800 |
17 2400 |
|
Elongation @ break |
% |
D-412 |
650 |
620 |
540 |
550 |
Compression Set 22 hrs @ 23℃ 22 hrs @ 70℃ |
% % |
D-395 (B) |
25 35 |
25 30 |
30 35 |
25 40 |
Tear Strength |
N/mm lb/in |
D-624 DIE C |
400 70 |
450 80 |
500 90 |
700 120 |
Abrasion Resistance |
mg (loss) |
D-1044 (Taber) H-22 |
5 |
20 |
20 |
50 |
The above values are shown as
typical values and should not be used as specifications.