ISOPAK® 525
Product |
: ABS RESINS |
Grade Characteristic |
: General
Purpose Injection Grade |
TYPICAL PHYSICAL PROPERTIES
PROPERTIES |
Test Method |
Test Condition |
Unit |
Value |
Izod Impact Strength (Notched) |
D256 Method A |
23℃ 1/8¨x1/2¨x5/2¨ |
kg-cm/cm |
21±1 |
Melt Flow Index |
D1238 |
220℃, 10kg/cm2 |
g/10mins |
17±2 |
Tensile Strength at Yield |
D638 |
23℃, 1/8¨ |
kg/cm2 |
510 |
Flexural Yield Flexural Modulus |
D790 |
23℃ 2.8mm/min |
kg/cm2 |
800 26,000 |
Heat Distortion Temp. |
D648 |
18.56kg/cm2 1/2¨x1/2¨x5¨ Unannealed |
℃ |
90 |
Rockwell Hardness |
D785 |
23℃ |
R Scale |
110 |
Specific Gravity |
D792 |
23℃ |
|
1.03 |
Water Absorption |
D570 |
24Hrs in 23℃ water |
|
0.3 |
Flammability |
UL-94 |
1/16¨ sample |
|
HB |
While the above information is presented in good faith and believed to
be accurate, GRECO does not guarantee
satisfactory results from reliance upon such information and disclaims
all liability for any loss or damage arising out
of its use.